Hot dash camera IR LED Night Vision Truck Bus Car Front Rear View Backup Camera

Item No.: ZM-CAM30-FST
1) ZMID Protocol
2) TTL/RS232/RS485 Interface
3) 38400-115200bps Baud Rate
4) Low Power Consumption
5) IP67 Waterproof Case,Nigth Vision
INQUIRY
Description Specifications
ZM-CAM30-FST Camera is a highly integrated serial JPEG camera module which can be attached to any host system that requires a JPEG compressed still camera for embedded imaging applications. The module uses a 1/2.7’’ CMOS color image sensor along with a DSP chip that provides a low cost and low powered camera system. The module has an on-board serial interface (TTL/RS232/RS485) that is suitable for a direct connection to any host microcontroller UART or a PC system COM port.

ZM-CAM30-FST Camera is capable of outputting JPEG format images only.
ZM-CAM30-FST camera comes in a compact form factor with a built in lens and a 4 pin PH 2.0 connector that provides easy access to both power and serial data. PC test tool is provided for easy testing. 

1 Image sensor 1/2.7F22 CMOS Sensor
2 Signal System PAL / NTSC
3 Horizontal Resolution 1920*1080
4 Effective Pixel (H×V) PAL: 1920(H)*1080(V)
5 Lens 2.8mm/ 3.6mm/6mm optional
6 Electronic Shutter Auto from 1/10S-1/10,000S
7 Backlight Compensation Auto
8 White Balance Auto
9 Gamma Correction 0.45
10 S/N Ratio ≥60dB
11 Scanning System 2:1 Interlaced
12 synchronization system Inner synchronization
13 Color to Black External Auto Control
14 Minimum Illumination 0 lux (IR On)
15 IR Leds 18Pcs Ф5 IR Leds
16 Night Vision 5 Meter – 6 Meter
17 Image Quality Color Image / Black & white Image
18 Video output 1.0Vp-p Composite Video Output ,
19 Connector 4P aviation connector
20 Pin Description PIN 1: DC+12V (RED)
PIN 2: GND (BLACK)
PIN 3: Audio (GREEN)
PIN 4: Video (YELLOW)
21 Cable Length 0.35 Meter
22 Power Supply DC 12V±0.5V
23 Consumption(Max) 110mA/DC12V±5%
24 IP Grade IP66
25 Working Temperature -30 to +85
26 Working Humidity 90%
27 Dimension: 67.48(L)*43(W)*79.77(H)mm
Relevant
Review